add chat to your website
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   

EliteProAV’s Saker Tab-Tension ALR  is 1.5 gain ambient light rejecting (ALR) projector screen that comes in Elite’s Saker electric “roll-up” configuration. ALR projection screens enhance picture quality with brighter imagery and more defined contrast levels. However, its greatest value comes from its ability to counter the “wash out” effect of ambient light. The material is also ISF certified for its ability to achieve D65 color neutrality, superb contrast and dynamic range bringing a world class performance to any installation. 
A complete integration kit along with full IR/RF control package is included as well as a 5-12v trigger to coordinate the screen’s drop and rise with the projector’s power cycle. All this is included in a stylish arcuate-profiled aluminum casing with white enamel coating and flush-wall floating brackets. 

Screen Material

  • CineGrey 5D® 1.5 Gain Ambient Light Rejecting (ALR) projector screen
  • ISF Certified - D65 color neutrality, superb contrast and dynamic range performance
  • Standard black masking borders absorb projector overshoot while enhancing perceived visual contrast
  • Active and Passive 3D compliant
  • 4K/8K Ultra HD and HDR Ready
  • Available in the following diagonal sizes:
    • 100", 120", 135", and 150" in 16:9 format

 

Design and Installation

  • Flush hidden wall mounts allow screen to slide horizontally for proper centering
  • Tab-tension design helps maintain a flat projection surface
  • Curved aluminum enamel white case with parallel grooves
  • Extra top black masking border for high ceiling installations
  • Plug & Play ready, no hardwire installation required
  • Mounting hardware kit included for wall or ceiling installation

 

Control System

  • Internal Radio Frequency/Infrared receivers with IR, RF remotes included
  • Detachable 3-way wall switch keypad for UP/STOP/DOWN manual operation
  • Wireless 5-12 volt trigger included
  • RJ45 port allows 3rd party control system integration

 

Quality and Reliability

  • Silent operation synchronous motor and low power consumption
  • 5-year manufacturer's warranty
  • InfoComm 2017- Saker Tab-Tension ALR Features

  • InfoComm 2017- EliteProAV™ Presents the Saker Tab-Tension ALR Series

.

Dimensions Table

The listed measurements are for general reference only. Please contact EliteProAV™ to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. EliteProAV™ will not be held responsible or be otherwise liable for faulty installations.

Decoding the Model Number
Model Number = SKT100XHD5-E12
SKT = Saker Tab-Tensioned Series
100 = Nominal Diagonal Size
X = White case/housing
H = HDTV 16:9 aspect ratio
D5 = CineGrey 5D® screen material
E12 = 12" of top black masking border/leader

Saker Tab-Tension ALR Dimensions Table
Model NumbersScreen Diag. Aspect RatioView Area (HxW)Screen MaterialGainOverall Length With Bracket (A)View Width (A1)End Cap Screw Hole Distance (A2)Overall Length Without Bracket (A3)Ceiling Bracket Hole Distance (A4)Screen Width (A5)Weight Bar Length (A6)L/R Black Masking (A7)Overall Height With Ceiling Bracket (B)View Height (B1)Screen Height (B2)Top Black Masking (B3)Bottom Black Masking (B4)End Cap Height With Bracket (B5)End Cap Width With Ceiling Bracket (C)End Cap Height With Ceiling Bracket (C1)Screen Material To Wall Distance (C2)Weight Bar Diameter (C3)
Model NumbersScreen Diag. Aspect RatioView Area (HxW)Screen MaterialGainOverall Length With Bracket (A)View Width (A1)End Cap Screw Hole Distance (A2)Overall Length Without Bracket (A3)Ceiling Bracket Hole Distance (A4)Screen Width (A5)Weight Bar Length (A6)L/R Black Masking (A7)Overall Height With Ceiling Bracket (B)View Height (B1)Screen Height (B2)Top Black Masking (B3)Bottom Black Masking (B4)End Cap Height With Bracket (B5)End Cap Width With Ceiling Bracket (C)End Cap Height With Ceiling Bracket (C1)Screen Material To Wall Distance (C2)Weight Bar Diameter (C3)
SKT100XHD5-E12100"16:949.0"x87.2"CineGrey 5D®Gain 1.5108.787.2107.3106.074.597.4103.65.168.349.063.412.02.44.64.64.91.40.9
SKT120XHD5-E12120"16:958.8"x104.6"CineGrey 5D®Gain 1.5127.0104.6125.6124.292.7115.6121.95.578.158.873.212.02.44.64.64.91.40.9
SKT135XHD5-E10135"16:966.2"x117.7"CineGrey 5D®Gain 1.5140.0117.7138.6137.3105.8128.7134.95.583.566.278.510.02.44.64.64.91.40.9
SKT150XHD5-E6150"16:973.5"x130.7"CineGrey 5D®Gain 1.5153.1130.7151.7150.4118.9141.8148.05.586.873.581.96.02.44.64.64.91.40.9
Unit

hd projector screen, Home Cinema Projector Screen, Home Movie Theater Screens, home theater projection screen, Home Theater Projector Screens, home theater screen, Buy Projector Screen, saker tab-tensions series dimensions, saker tab tension series dimensions, saker tab tension dimensions, saker tab-tension dimensions, elite screens saker tab-tension dimensions, electric projection screen, electric projector screen

Saker Tab-Tension ALR Dimensions Table
Model NumbersDiag. SizeAspect RatioN.W. (lbs.)G.W. (lbs.)N.W. (kgs)G.W. (Kgs)Packaging Dimensions (LxWxH)
Model NumbersDiag. SizeAspect RatioN.W. (lbs.)G.W. (lbs.)N.W. (kgs)G.W. (Kgs)Packaging Dimensions (LxWxH)
SKT100XHD5-E12100"16:942.2 lb61.7 lb20.5 kg28.0 kg111.81"x8.46"x7.87"
SKT120XHD5-E12120"16:951.4 lb71.1 lb23.3 kg32.3 kg129.92"x8.46"x7.87"
SKT135XHD5-E10135"16:958.9 lb75.9 lb26.7 kg34.4 kg142.70"x8.46"x8.07"
SKT150XHD5-E6150"16:9*****Information coming soon
Unit

Projector Placement for Angular-Reflective Screen

Notice to Installer:

Please use the following installation instructions to obtain superior optical performance from the ALR (Ambient Light Rejecting) Screen.

  • Angular-Reflective material is not compatible with ultra/short-throw projectors
  • Minimum lens throw ratio 1.5x image width
  • Ambient light must not come from the same direction as the projector 

 

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is important to position the projector so that the viewer will get the best possible image.

  • Step 1: Establish the general “eye level” of the viewers
  • Step 2: Set the appropriate projection level
  • Step 3: Adjust the screen height level and projection angle 

Input Angle (A) = Output Angle (B) aligns with the viewer’s angle

angular reflective screen material, ambient light rejecting screen, alr tip, angular reflective ambient light rejecting screen material

.

.

Reviews

Submit your product review here

.

FAQ's

Q: Can I buy a small screen material sample?

A: Yes, you can buy a screen material sample by clicking here.

Q: I am interested in improving image performance (brightness, color, contrast, etc.) for projected images in a church sanctuary with high levels of ambient light. A salesperson recommended using a brighter 4700 lumen projector. Would this offer more noticeable improvement than using elite cinegray 5d® screen material? 
A: 
A brighter projector (higher lumens) will help with image brightness but it does not help with color contrast or black levels.  Since the projected image performance is important here, a contrast-enhancing material such as CineGrey 5D® is essential.  White materials will reflect all of the light in the room; the projected light, indoor lighting, and sunlight through windows and doorways, everything.  Because of this, the ambient lighting will still spoil image performance even with a bright projector.  Ambient light rejecting (ALR) screens such as CineGrey 5D® filter out indirect light allowing your projected image to be what your audience will see instead of the extra glare.  In addition to that, the screen’s filter layers enhance black levels and color contrast.  This means that shadows, textures and slight variations in color shading in the projected image can be easily seen.  Without an ALR material, such detail and clarity will not be visible. As you can see from the photos below, a bright projector does not enhance contrast.

 

 

Q: How well does the CineGrey 5D® or CineGrey 3D® perform in a dark room environment?

A: The CineGrey 5D® and CineGrey 3D® is great for dark room environment also, but we must understand its limitations.

First of all, both materials have narrow viewing angles.  So if you wish to have a wide seating arrangement after 80 degrees, you will notice a drop in brightness.

Second, because they are higher gain screens they reflect more projector brightness.  This may tire your eyes, so we recommend using a less brighter mode if your projector has a such setting.

If that is not a problem, then these materials will work.  And the best thing is, because they are angular reflective material, the projector’s light will not diffuse in all directions like a matte white material.  Meaning that they will not scatter the projector’s light and create side lighting. Thus, eliminating the need to absorb it with black velvet or paint a room really dark.

Third, because both of these materials are made with a neutral gray substrate, the color balance and temperature will be exceptional.  The dark gray also enhances contrast and great color saturation.

Q: Can I use my manual/electric Elite projection screen as a window shade to block the sunlight?
A: 
No, Elite manual and electric projection screens are not designed for use as a window curtain and should never be exposed to direct sunlight.  Prolonged exposure to solar radiation will destroy synthetic materials and such damage is not covered by our standard warranty.

Q: I have a short throw/ultra-short throw projector, will this projector work with the ambient light rejecting CineGrey 3D®/5D® materials?
A:  The ambient light rejecting properties of the CineGrey 3D®/5D® make the materials incompatible with short throw and ultra-short throw projectors. The recommended minimum projector throw distance for these materials is 1.5 times the viewing image width. There are two main reasons behind this:

  1. The CineGrey 3D®/5D® are high gain and angular reflective screen materials. These types of materials require proper projector and screen alignment as hot-spotting may occur if not set up correctly.
  2. Due to the CineGrey 3D®/5D® materials being angular reflective, the angle of incidence from short-throw and ultra short-throw will be too close to the material and the viewer will not experience the optimal projector/screen performance. The material will treat the projector’s light as ambient light and thus it will reflect it in the wrong direction.

Q: I have an Ambient Light Rejecting screen but it does not seem to work. There are windows behind my projector and the picture is washed out; what can be done?
A: *Disclaimer:  
As great as ambient light rejecting screen technologies are, there are still certain laws of physics that define what should and should not be done with a specialty material such as this.

Main Answer:  Ambient Light Rejecting (ALR) projector screens are specially formatted to reject the majority of off-axis lighting from the top, bottom, and side angles. 
However if a strong light source is hitting the ALR material at roughly the same angle as the projector does, it will wash out the image.  
There is an easy solution.  I strongly recommend light blocking curtains or blackout shades to shield your room and to rely on the interior lighting that ALR screens work with.


See complete list of FAQ here  

.

Questions and Suggestions

Name *

E-mail *

Address 1 *

Address 2

City *

Zip-Code

State

Country *

Phone *

Subject*

Please tell us what series or accessories you are browsing *

Message*

Captcha*

Can't read the image? click here to refresh.