CineTension Plus is a robust and well made electric motorized projector screen. Its tab-tensioned material provides uniform flatness and has a wide viewing angle. The 1.1 gain material is also 4K Ultra HD and active 3D ready. It drops and retracts by means of a powerful tubular motor and its sliding installation brackets ensure a perfectly centered installation. A full IR/RF, RJ45 and 5-12 volt trigger control package is included.
Available in the following projection materials
| Material Name | Gain | Viewing Angle | Description |
| CineWhite® | 1.1 | 180° |
CineWhite® has broad light dispersion through diffusion uniformity, black & white contrast and true color rendition. Recommended for rooms with controlled lighting. Works with Standard, Ultra/Short-throw 1080P/4K projectors. |
| WraithVeil | 2.2 | 160° |
WraithVeil is our rear projection material which has a special surface coating that enhances color reproduction and black level contrast with good uniformity for large audiences. Ideal for moderate room lighting environments. |
Screen Material
- CineWhite® Tension material provides uniform flatness in a versatile material
- 180° wide viewing angle
- Active 3D, 4K Ultra HD, and HDR Ready
- Standard black masking borders and black screen backing
- Available in the following diagonal sizes:
- 180" and 200" in 16:9 format
Design and Installation
- Streamlined arcuate profile aluminum heavy-duty white case
- Ring bolts included on case for suspended ceiling installation
- Plug & Play ready, no hardwire installation required
Control System
- Internal Radio Frequency/Infrared receivers with IR, RF remotes included
- Infrared IR "eye" extension sensor - ideal for concealed installation but still require infrared control
- Detachable 3-way wall switch keypad for UP/STOP/DOWN manual operation
- Wireless 5-12 volt trigger included for synchronized screen operation with the projector's power cycle
- RJ45 port allows 3rd party control system integration
Quality and Reliability
- Tubular motor allows swift operation with a superior weight tolerance and operational lifespan
- 5-year manufacturer's warranty
.
Dimensions Table
The listed measurements are for general reference only. Please contact EliteProAV™ to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. EliteProAV™ will not be held responsible or be otherwise liable for faulty installations.
Decoding the Model Number
Model Number = TE110HW2-E24
TE = Tensioned Screen
110 = Nominal Diagonal Size
H = HDTV 16:9 aspect ratio
(V = 4:3 / X = 16:10 / S = 1:1 / C = 2.35:1)
W = Matte White screen material
2 = Version 2
E24 = 24" of top black masking border/leader
.
Downloads
.
FAQ's
Q: Can I buy a small screen material sample?
A: Yes, you can buy a CineWhite® screen material sample by clicking here.
Buy a WraithVeil screen material sample by clicking here.
Q: How do I synchronize the ZU12V Universal 12 Volt Projector Trigger to my Elite electric screen?
A: For the instructional guide on synchronizing the ZU12V, please click here.
To watch the instructional video, please click here.
Q: Can I use my manual/electric Elite projection screen as a window shade to block the sunlight?
A: No, Elite manual and electric projection screens are not designed for use as a window curtain and should never be exposed to direct sunlight. Prolonged exposure to solar radiation will destroy synthetic materials and such damage is not covered by our standard warranty.
Q: How can I extend my RJ-45 accessory such as my 5-12 v trigger, 3-way wall switch, and IR "eye" sensor?
A: You can extend the length of your cable using the ZSP-12V-50B. This 50 feet RJ-45 cable includes an extender plug coupler to allow you to join connections to your existing accessory.
Q: What preventative maintenance does Elite recommend for electric screens?
A: Elite strongly recommends using either a standard surge protector or a power conditioner on all electric projection screens.
Q: How do I properly clean the CineWhite® screen material?
A: The CineWhite® screen material can be cleaned with a soft cloth using mild soap and water.
Q: Can my CineTension Plus screen be mounted in the ceiling?
A: Yes, all CineTension Plus series screens can be mounted in a ceiling using our in-ceiling trim kit which can be found in our accessories section.
Q: How do I know if my projector is compatible with the 5-12 volt trigger?
A: Check your projector's manual to see if your projector has a 5-12 volt trigger output. If it does then your projector has the ability to synchronize with your CineTension 2.
Q: Does the CineTension Plus include a 5-12 volt trigger cable?
A: Yes, the CineTension Plus includes an RJ-45 5-12 volt trigger.
Q: Will I void my warranty if I cut the power cord cable to hardwire my electric screen?|
A: No, EliteProAV understand the need to hardwire your electric screen and therefore will not void your warranty.
Q: Where can i find the IR codes for my CineTension Plus IR remote?
A: Elite provides binary codes for the IR remote, see below.
Up: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100
Q: Are Elite's screens compatible with Harmony Remotes?
A: Yes, Elite's electric screen products are compatible with Harmony remotes and in their database.
Please visit the Harmony website for further assistance with programming your remote with our electric screens.
http://myremotesetup.com/easyzapper/New/Main.asp
Q: What is the frequency of your RF remote?
A: The frequency of the RF remote is 433MHz.
Q: Can I increase the Top Black Border on my screen?
A: No, your screen’s Top Black border has been set to deploy to its full extent. Attempting to increase will damage the motor and void your warranty with EliteProAV.
Q: Are the Hanging brackets on the CineTensions Plus adjustable?
A: Yes, the hanging brackets on the CineTension Plus slides horizontally along the casing.
Q: What is the power consumption and motor RPM for my Elite Electric screen?
A: Please Click here for the motor information of your Elite electric screen.
Q: What is the power cable length of the CineTension Plus Series Electric Screen?
A: The power cable length for all CineTension Plus Series models is approximately 98.4" (2.5M). Note: This measurement is accurate for USA only, other countries may be equipped with different lengths for each model.
See the complete list of FAQ here
