Does the Spectrum include a 5-12 volt trigger cable?
Yes, the Spectrum includes an RJ-45 5-12 volt trigger cable.
Spectrum Series FAQ’s
Does the Spectrum have a 5-12 volt trigger input?
Yes, the Spectrum has a RJ-45 5-12 volt trigger input.
How can i clean the MaxWhite® (matte white) material on the Spectrum screen?
The screen material can be cleaned with mild soap and water.
Where can I find the wired RJ-45 5-12 volt trigger adaptor pin-layout?
The adaptor can easily be made by using a CAT-5 networking cable and a RJ-45 networking connector. See image below and please note that the RJ-45 is exclusively designed to be compatible with only a projector’s trigger output. Any other type of device’s trigger output that you choose to utilize with our product is to your…
I have a VMAX2 (Spectrum, Home2, CineTension2, VMAX Plus4) screen and a universal remote, what is the code needed to control the screen with the remote?
Our IR remote controls have been evaluated and entered in to the databases of some Universal remote control manufacturers. Please contact the manufacturer of your remote to inquire about your remote’s ability to function with ours. If they have not evaluated our remote control then the following list of Binary codes will be used for…
What type of screw size does Elite Screens recommend when installing a Spectrum, VMAX2, or a Manual Screen?
Although each installation is unique, the screw size we recommend and provide is M5*50mm. We have found that this screw size will provide enough length to support a Spectrum, VMAX2, or Manual screen installation in most instances. For drywall installations, the Φ10*40mm wall anchors (also included) should be installed along with the M5*50mm screws. **Please…