Fixed projection screen solutions are the ideal for the designated screening room where the proverbial “big picture” is not just present but flaunted. Choose from front or rear projection, acoustically transparent or ambient light rejecting (ALR) framed projector screen options.
Elite’s fixed projector screens are available in a variety of fixed frame projector screen designs.
Choose from a traditional velveteen coated framework, to a curved frame or EdgeFree® which is an internal framework within a wraparound screen material for your permanent projector screen.
A new design feature for the CineWhite® material is a rubber-edge border that makes installation a lot easier and a lot less time consuming. As an added bonus, a new installation kit is included free of charge.  Innovative features have been developed to fix projector screen materials in place so that a perfect degree of diffused flatness is achieved over every projector surface of each fixed frame projection screen.

Showing 1–9 of 19 results

  • Aeon AcousticPro UHD Series
    Acoustically Transparent
    Short-Throw
    Standard Throw
    Ultra Short-Throw

    Aeon AcousticPro UHD Series

    The Aeon AcousticPro UHD is an acoustically transparent (AT) Ultra-Hi Def fixed frame projection screen. The AcousticPro UHD acoustically transparent material is designed to complement in-wall speakers while allowing sound to pass through the material with minimal attenuation. Its tight perforated weave design allows a superior AT performance without sacrificing picture quality.

     

    Where to Buy Buy Now

  • Aeon CineGrey 3D® AT Series
    Acoustically Transparent
    Ambient Light Rejecting
    Standard Throw

    Aeon CineGrey 3D® AT Series

    Elite Screens’ Aeon CineGrey 3D® AT is a fixed frame ambient and ceiling light rejecting (ALR/CLR®) projection screen that is perforated to permit acoustic transparency for use with in-wall speakers.

    The thin frame design maximizes the viewing area into a smaller footprint which is more appealing in appearance and in accommodating room décor. The CineGrey 3D® AT is ISF Certified for accurate color reproduction, contrast and dynamic range to create a bright, crisp, and clear image.

    Where to Buy Buy Now

  • Aeon CineGrey 3D® Series
    Ambient Light Rejecting
    Standard Throw

    Aeon CineGrey 3D® Series

    CineGrey 3D® is  a reference quality front projection screen material formulated for environments with minimial control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The CineGrey 3D® is best for family rooms, educational facilities, conference rooms or any applications in which incidient light is a factor. Typical matte white surfaces wash out the images when ambient light cannot be controlled. The CineGrey 3D® is the best choice for having a projected image with a balanced color temperature and contrast under such conditions.

    It provides a flat spectral response for an accurate color balance in dark room environments as well for reference quality applications. The CineGrey 3D® is ready for the next-generation of high-performance video.

    Made in Taiwan

    Where to Buy Buy Now

  • Acoustically Transparent
    NEW!
    Short-Throw
    Standard Throw
    Ultra Short-Throw

    Aeon CineWhite® A8K Series

    The Aeon CineWhite® A8K is an EDGE FREE® fixed frame screen with an ultra-fine acoustically transparent front projection material for high-resolution projectors.

    The CineWhite® A8K material allows sound to pass through the multi-layer fabric with minimal attenuation. Its bonded black backing eliminates light loss while reducing light reflection. It is ISF Certified for accurate color reproduction in a dark room environment for presenting videophile presentations.

    COMING SOON

     

    Where to Buy Buy Now

  • Aeon CLR® 2 Series
    Ambient Light Rejecting
    Ultra Short-Throw

    Aeon CLR® 2 Series

    The Aeon CLR® 2 is an EDGE FREE® ceiling and ambient light rejecting (ALR/CLR®) projection screen. It specializes in negating the washout effect caused by overhead and other off-axis light sources. This technology allows the CLR® 2 material to display true image brightness, color saturation and contrast for superior picture performance. As an added value, the CLR® 2 has superb black-white dynamic range over a non-textured, smooth surface that enables compatibility with 4K/8K resolution projectors. The CLR® 2 features a durable scratch-resistant coating that is easy to clean and will protect the material through many years of use. This screen material is designed for use with ultra-short throw table-top configurations as well as short throw projector arrays. An ultra-thin bezel enhances the aesthetics by providing that giant flat panel TV appearance at a fraction of the cost.

    Made in Taiwan

     

    Where to Buy Buy Now

     

    Outdoor theater deal

  • Ambient Light Rejecting
    Ultra Short-Throw

    Aeon CLR® 3 Series

    The Aeon CLR® 3 is an EDGE FREE® fixed frame screen that utilizes our CLR® 3 (Ceiling Light Rejecting®) material. Its serriform optical surface lens microstructure negates the washout effect of ambient light especially from overhead sources. This also enables the material to provide contrast levels that are 75 times greater than that of standard matte white projection screens.

    CLR® 3 is specifically designed for ultra-short-throw projectors to provide a large-screen performance in the close quarters of most residential or training room environments. CLR® 3 offers a wide viewing angle, neutral color temperature, and enhanced picture contrast in a theater-grade image.

    EDGE FREE® means there is an internal framework with wraparound material bordered with an ultra-thin bezel. The screen uses a Ceiling Light Rejection® technology.

     

    Where to Buy Buy Now

     

    Outdoor theater deal

  • Aeon CLR® Series
    Ambient Light Rejecting
    Ultra Short-Throw

    Aeon CLR® Series

    The Aeon CLR® is an EDGE FREE CLR® fixed frame screen that uses Elite Screens innovative StarBright CLR® (Ceiling Light Rejecting®) material. Its serriform optical surface lens microstructure negates the washout effect of ambient light especially from overhead sources. This also enables the material to provide contrast levels that are 100 times greater than that of standard matte white projection screens.

    StarBright CLR® is specifically designed for ultra-short-throw projectors to provide a large-screen performance in the close quarters of most residential or even training environments.  Aeon CLR® with StarBright CLR® offers a wide viewing angle, neutral color temperature, and enhanced picture contrast in a theater-grade image.

    EDGE FREE CLR® means there is an internal framework with wraparound material bordered with an ultra-thin bezel.  The screen uses a Ceiling Light Rejection® technology. An LED back-lighting Kit is included for added aesthetics.

    Where to Buy Buy Now

  • Aeon Series
    Short-Throw
    Standard Throw
    Ultra Short-Throw

    Aeon Series

    The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The Aeon includes an ultra-thin trim as an installation option to further enhance the overall appearance.

     

    Where to Buy Buy Now

     

    Outdoor theater deal

  • DarkStar® Special Edition
    Ambient Light Rejecting
    Standard Throw

    DarkStar® Special Edition

    The Special Edition DarkStar® provides reference grade video performance in either a dark room or rooms with high levels of interior lighting. Instead of the image washout common with typical matte-white projection screens, the SE DarkStar® blocks illumination from overhead or off-axis light sources for a bold, bright, crystal-clear image even in the most challenging spaces. When shown under optimal cinematic lighting conditions, the material lives up to its ISF certification by the world-renowned Imaging Science Foundation.

    The projection surface is bordered by a 2.3” (59.4 mm) thick aluminum frame that is coated in hand-wrapped velvet. The DarkStar® 9 screen is a composite, multi-layer material designed to reject ambient light away from the viewer’s field of vision. This composite material eliminates the washout effect which destroys matte white imagery under bright room lighting conditions. The Dark Star® 9 material attaches to the frame using a spring and grommet construction that ensures perfect uniform flatness. In addition to absorbing overhead ceiling light, the DarkStar® 9’s black diffusion layer provides high-contrast performance to enhance color saturation, contrast and black level dynamic range.

     

    Where to Buy Buy Now