Showing 1–30 of 154 results
3-Way Wall Switch
Detachable RJ-45 ethernet connection 3-way wall switch.
- Detachable 3-way wall switch box connects to RJ45 port
- Available in black (ZSP-WB-B) or white (ZSP-WB-W)
- For use with : Spectrum, Spectrum Tab-Tension, VMAX2, CineTension2, Home 2, Evanesce, Evanesce B, Evanesce Tab-Tension, Evanesce Tab-Tension B
5-12V Trigger Cable & IR “Eye” Receiver
Set of 5-12V trigger cable and IR “Eye” Receiver.
- 6 inch 5-12 V trigger RJ-45 ethernet cable
- Connects to all VMAX2, Spectrum, Home2 and CineTension2 screens to compatible projectors with 5-12 volt trigger output
- 3 1/2 inch RJ-45 ethernet IR “Eye” Receiver for conceal installations
- Allow the IR receiver “eye” to extend down for continued IR remote use
- Available in black (ZSP-EYE&12V-B) or white(ZSP-EYE&12V-W)
- IR “eye” sensor & 5-12v trigger cable for All Elite Electric Screens
50 feet RJ-45 cable
The ZSP-12V-50B is a 50 feet RJ-45 cable to extend your accessories such as the 3-way wall switch, 5-12 v trigger, and IR “eye” sensor.
- 50 feet RJ-45 cable with coupler
- Extension for your RJ-45 accessories: 3-way wall switch, 5-12v trigger, and IR “eye” sensor
- Quickly connect your existing accessory with the included coupler
- Join your accessories together with ease
Standard ThrowAcoustically TransparentAcousticPro 1080P3
The AcousticPro 1080P3 is an acoustically transparent perforated weave fabric front projection material. The angular weave eliminates the moire effect while presenting warm neutral colors for today’s high definition 1080P (1920×1080) and 4K UHD projectors. The AcousticPro1080P3 allows speaker placement behind while allowing an exceptional acoustically transparent performance.
Standard ThrowAcoustically TransparentAcousticPro UHD
The AcousticPro UHD (ultra-high definition) is a moiré-free self-supported acoustically transparent front projection screen material. The dense synthetic perforated weave is compatible with Ultra-High Definition/4K resolutions while mitigating light penetration for a brighter picture. The AcousticPro UHD design maximizes sound penetration with minimal attenuation without compromising picture quality. The AcousticPro UHD material’s wide diffusion uniformity offers a broad viewing angle with superb picture quality across the entire surface.This provides equal brightness levels on or off axis.
“Speaking of “observing”, the Electric125H-AUHD performed admirably across a diversity of content and at all hours of day and night; its ambient light suppression was top-notch.” – Brian Dipert, EDN Network
Ultra Short-ThrowShort-ThrowStandard ThrowAcoustically TransparentAeon AcousticPro 1080P3 Series
The Aeon AcousticPro 1080P3 an EDGE FREE® acoustically transparent fixed frame screen for dedicated home theater rooms.
The tight weave eliminates the moiré effect while presenting warm neutral colors. It includes a black backing to reduce light reflection. This material allows speaker placement behind while allowing an exceptional acoustically transparent performance with minimal attenuation.
Short-ThrowStandard ThrowAcoustically TransparentAeon AcousticPro UHD Series
The Aeon AcousticPro UHD is an acoustically transparent (AT) Ultra-Hi Def fixed frame projection screen. The AcousticPro UHD acoustically transparent material is designed to complement in-wall speakers while allowing sound to pass through the material with minimal attenuation. Its tight perforated weave design allows a superior AT performance without sacrificing picture quality.
Standard ThrowAmbient Light RejectingAcoustically TransparentAeon CineGrey 3D® AT Series
Elite Screens’ Aeon CineGrey 3D® AT is a fixed frame ambient and ceiling light rejecting (ALR/CLR®) projection screen that is perforated to permit acoustic transparency for use with in-wall speakers.
The thin frame design maximizes the viewing area into a smaller footprint which is more appealing in appearance and in accommodating room décor. The CineGrey 3D® AT is ISF Certified for accurate color reproduction, contrast and dynamic range to create a bright, crisp, and clear image.
Standard ThrowAmbient Light RejectingAeon CineGrey 3D® Series
CineGrey 3D® is a reference quality front projection screen material formulated for environments with minimial control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The CineGrey 3D® is best for family rooms, educational facilities, conference rooms or any applications in which incidient light is a factor. Typical matte white surfaces wash out the images when ambient light cannot be controlled. The CineGrey 3D® is the best choice for having a projected image with a balanced color temperature and contrast under such conditions.
It provides a flat spectral response for an accurate color balance in dark room environments as well for reference quality applications. The CineGrey 3D® is ready for the next-generation of high-performance video.
Standard ThrowNEW!Ambient Light RejectingAcoustically TransparentAeon CineGrey 4D AT Series
The Aeon CineGrey 4D AT is an acoustically transparent EDGE FREE® fixed frame screen with ambient light rejecting technology. It is perforated to allow speaker placement behind the screen to allow sound to breathe through while producing outstanding imagery in dark or bright room environments. The screen material is wrapped around the frame which enables it to have a flat and taut permanently tensioned front projection surface. An LED kit is available and sold separately.
Standard ThrowNEW!Ambient Light RejectingAeon CineGrey 5D® Series
The Aeon CineGrey 5D® is a ceiling ambient light rejecting fixed frame screen with an EDGE FREE® design for a minimalistic appearance. The CineGrey 5D® front projection material is the perfect solution for rooms that have little or no control over incidental light. It is an ideal fit for family rooms as well as lecture halls, boardrooms, sports bars, training facilities, and other business environments.
CineGrey 5D is superior to traditional white or gray materials in its ability to maintain a sharp, bright image regardless of ambient light. The angular reflective material incorporates a diffusion layer over a high reflective surface. This causes direct light from the projector to reflect squarely into the viewer’s field of vision while the outer contrast layer enhances image quality while absorbing indirect ambient light.
Ultra Short-ThrowShort-ThrowStandard ThrowNEW!Acoustically TransparentAeon CineWhite® A8K Series
The Aeon CineWhite® A8K is an EDGE FREE® fixed frame screen with an ultra-fine acoustically transparent front projection material for high-resolution projectors.
The CineWhite® A8K material allows sound to pass through the multi-layer fabric with minimal attenuation. Its bonded black backing eliminates light loss while reducing light reflection. It is ISF Certified for accurate color reproduction in a dark room environment for presenting videophile presentations.
Ambient Light RejectingUltra Short-ThrowAeon CLR® 2 Series
The Aeon CLR® 2 is an EDGE FREE® ceiling and ambient light rejecting (ALR/CLR®) projection screen. It specializes in negating the washout effect caused by overhead and other off-axis light sources. This technology allows the CLR® 2 material to display true image brightness, color saturation and contrast for superior picture performance. As an added value, the CLR® 2 has superb black-white dynamic range over a non-textured, smooth surface that enables compatibility with 4K/8K resolution projectors. The CLR® 2 features a durable scratch-resistant coating that is easy to clean and will protect the material through many years of use. This screen material is designed for use with ultra-short throw table-top configurations as well as short throw projector arrays. An ultra-thin bezel enhances the aesthetics by providing that giant flat panel TV appearance at a fraction of the cost.
Ambient Light RejectingUltra Short-ThrowAeon CLR® 3 Series
The Aeon CLR® 3 is an EDGE FREE® fixed frame screen that utilizes our CLR® 3 (Ceiling Light Rejecting®) material. Its serriform optical surface lens microstructure negates the washout effect of ambient light especially from overhead sources. This also enables the material to provide contrast levels that are 75 times greater than that of standard matte white projection screens.
CLR® 3 is specifically designed for ultra-short-throw projectors to provide a large-screen performance in the close quarters of most residential or training room environments. CLR® 3 offers a wide viewing angle, neutral color temperature, and enhanced picture contrast in a theater-grade image.
EDGE FREE® means there is an internal framework with wraparound material bordered with an ultra-thin bezel. The screen uses a Ceiling Light Rejection® technology.
Ambient Light RejectingUltra Short-ThrowAeon CLR® Series
The Aeon CLR® is an EDGE FREE CLR® fixed frame screen that uses Elite Screens innovative StarBright CLR® (Ceiling Light Rejecting®) material. Its serriform optical surface lens microstructure negates the washout effect of ambient light especially from overhead sources. This also enables the material to provide contrast levels that are 100 times greater than that of standard matte white projection screens.
StarBright CLR® is specifically designed for ultra-short-throw projectors to provide a large-screen performance in the close quarters of most residential or even training environments. Aeon CLR® with StarBright CLR® offers a wide viewing angle, neutral color temperature, and enhanced picture contrast in a theater-grade image.
EDGE FREE CLR® means there is an internal framework with wraparound material bordered with an ultra-thin bezel. The screen uses a Ceiling Light Rejection® technology. An LED back-lighting Kit is included for added aesthetics.
“It was clear within seconds, the Aeon CLR series offered tremendous improvements in daylight viewing. Content that was nearly unwatchable during the day was suddenly bursting with colors.” – Brian Mitchell, ecoustics.com
Ultra Short-ThrowShort-ThrowStandard ThrowAeon Series
The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The Aeon includes an ultra-thin trim as an installation option to further enhance the overall appearance.
AirFlex5D™ Circular Polarized Glass (ZAF-GC10)
Circular Polarized Glass for DLP Projector -10pcs
ZAF-GC10 is not only match with Aflex5D’s own circular polarized filter but also suitable for most of the passive 3D TV, such as LG, VIZIO and RealD Theater glasses. Giving you commercial-grade quality with affordable price.
AirFlex5D™ Digital Multi-Projector Stacking System (AF5D-21)
- 3840*1080 input & 2k x 1k (2048×1080) output
- Support HDMI 1.4 standard 3D formats from Blu-ray, game, PC and Nvidia 3D Vision 1080P 100/120Hz 3D format
- DVI-D input port connects to DVI & HDMI signals
- Dual DVI-D output ports to support DVI & HDMI connections
- Embedded audio input and output via HDMI connection
- 10-bits scaler with high performance de-interlace and scaling
- 3D demultiplexer decodes RH/LH for passive 3D display
- “Perfect Sync” algorithm for zero latency between RH/LH channels in 3D mode
- User friendly OSD and IR remote control.
- Video wall function supports up to 15×15 matrix displays with pixel base bezel adjustment
- Support uncompressed 3840*1080 input with dual 1080p outputs for 2 full HD TV video wall display.
- Supports Blu-ray 1080p 24Hz frame packed and PC 1080P 100/120Hz Nvidia 3D for 720p/XGA 100/120Hz active 3D display.
AirFlex5D™ IR Remote for Aflex5D 20, 21 and 30 Series (ZAF5D-IR-3)
- IR Remote for Aflex5D 20, 21 and 30 Series.
- Easy setup & alignment through full-function remote
Ambient Light RejectingStandard ThrowAmbient Light Rejecting WhiteBoardScreen™ Series
The versatile Ambient Light Rejecting WhiteBoardScreen™ has enhanced reflectivity: This whiteboard projection screen uses our unique StarBright™ 4 (4.0 gain) material for in-line seating. Its highly reflective projection surface enhances brightness and contrast while countering the washout effect of ambient light. It is perfect for rooms with high ambient light, such as presentation rooms, when used with standard throw projectors.
Ultra Short-ThrowShort-ThrowStandard ThrowCineGrey
CineGrey (Tension High Contrast Grey) is designed for low contrast DLP and LCD Home Cinema Projectors. Its superior flatness makes the CineGrey ideal for home theater use. It enhances black levels while minimizing loss in color reproduction. Uniform diffusion surface has black-backing to eliminate light penetration and is easily washable with mild soap and water. *Manufacturer’s Tip: if your projector’s contrast ratio is more than 2000:1, we recommend you use CineWhite material for a brighter picture.
Where to Buy Buy Screen Material Sample
Standard ThrowAmbient Light RejectingCineGrey 3D®
The CineGrey 3D® is a reference quality front projection screen material formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The CineGrey 3D® is best for family rooms, educational facilities, conference rooms or any applications in which incident light is a factor. Typical matte white surfaces wash out the images when ambient light cannot be controlled. The CineGrey 3D® is the best choice for having a projected image with a balanced color temperature and contrast under such conditions.
It provides flat spectral response for an accurate color balance in dark room environments as well for reference quality applications. The CineGrey 3D® is ready for the next-generation of high-performance video.
Standard ThrowAmbient Light RejectingAcoustically TransparentCineGrey 3D® AT
The CineGrey 3D® AT is an ambient and ceiling light rejecting (ALR/CLR®) projection screen material that is perforated to permit acoustic transparency for use with in-wall speakers. It is ISF Certified for accurate color reproduction, contrast and dynamic range to create a bright, crisp, and clear image.
Standard ThrowCineGrey 4D
The CineGrey 4D is a 1.1 gain flexible front projection ceiling ambient light rejecting material for standard throw projectors. It can reject up to 63% of off-axis lighting while providing a bright, contrast rich image in moderate light room environments. The CineGrey 4D produces outstanding images with a balanced color temperature for residential and commercial applications. The ambient light rejecting properties assist in maintaining picture clarity that does not wash out the image like typical matte white surfaces do under ambient light conditions. The surface is precisely formulated to ensure optical image characteristics for high resolution projectors.
Standard ThrowAmbient Light RejectingAcoustically TransparentCineGrey 4D AT
The CineGrey 4D AT is an Acoustically Transparent front projection Ceiling Ambient Light Rejecting (ALR/CLR®) material that is perforated to allow sound to breathe through for speaker placement behind the screen. Its angular reflective properties are designed to work with standard throw projectors for proper reflection to the viewer’s sweet spot. The Ambient Light Rejecting technology rejects and absorbs off-axis lighting to provide contrast-rich images in any environment. The surface is precisely formulated to ensure optical image characteristics for high resolution projectors.
The CineGrey 4D AT is ISF Certified for accurate color reproduction in dark room environments to faithfully reproduce the content as the director intended.
Standard ThrowAmbient Light RejectingCineGrey 5D®
The CineGrey 5D® is an angular reflective front projection material designed to reject ambient light while maintaining superb picture quality. The CineGrey 5D® is the perfect solution for rooms that have little or no control over incidental light. This means that it’s an ideal fit for family rooms as well as lecture halls, boardrooms, sports bars, training facilities, and other business environments. In addition, the CineGrey 5D® increases projector brightness 1.5 times the amount. This is perfect for low lumens ouput projectors!
The CineGrey 5D® is superior to traditional white or gray materials in its ability to maintain a sharp, bright image regardless of ambient light. The angular reflective material incorporates a diffusion layer over a highl reflective surface. This causes direct light from the projector to reflect squarely into the viewer’s field of vision while the outer contrast layer enhances image quality while reflecting indirect ambient light.
CineTension 2 Series
CineTension 2 is a robust and well made electric motorized projector screen. Its tab-tensioned material provides uniform flatness and has a wide viewing angle. The 1.0 gain material is also 4K Ultra HD and active 3D ready. It drops and retracts by means of a powerful tubular motor and its sliding installation brackets ensure a perfectly centered installation. A full IR/RF, RJ45 and 5-12 volt trigger control package is included.
Ultra Short-ThrowShort-ThrowStandard ThrowCineTension 2 WraithVeil® Dual Series
CineTension 2 WraithVeil® Dual is a sturdy, well-made electric motorized projector screen that has front and rear-projection capabilities. Its tab-tensioned material provides uniform flatness for exceptional projected image clarity. The WraithVeil® Dual material presents a bright, clear image on both sides when projected upon from either angle. This versatile fabric gives optimal results under controlled room lighting while maintaining excellent performance under mild levels of ambient lighting with a high lumens (output) projector. The screen drops and retracts by means of a powerful tubular motor. Its sliding installation brackets ensure a perfectly centered installation. In addition to the installation kit, a full IR/RF, RJ45 and 12-volt trigger control package is included.
