Questions? Comments? Email us at

Saker Tab-Tension 12V trigger and Vertical Height Settings

Elite Screens' Blog Team

Elite Screens' Blog Team

Here is a discussion on adjusting the vertical limit switch of Elite projector screens.  It also contains information on how relatively easy the connection of the 5-12V trigger is.

*The discussion below is based on actual chat transcripts with the omission of any personal/confidential material to protect the customer’s privacy. An example in this case is to change the contact’s identification name/number to “Customer” or a generic name.



[23:38]        Jaime: Hello, how may I help you? 

[23:38] Customer: Hello, i had a question on the electric screens

[23:39] Customer: specifically, the Spectrum Tab-Tension. I see that it states support for 5-12v remote trigger. what type of connection is that?

[23:39] Customer: is it 3.5mm analog?

[23:40]        Jaime: Your projector will be a 3.5 mm mono jack

[23:40]        Jaime: The screen utilizes an RJ 45 port

[23:40]        Jaime: We provide the trigger wire for the screen

[23:40]        Jaime: You need the wiring and 3.5mm jack

[23:41] Customer: okay so on your end it’s just an rj45 to rj45 cable?

[23:43] Customer: I see it on the website. So it’s an rj45 to bare wire

[23:43]        Jaime: Correct

[23:43]        Jaime: You splice in your own wiring to the bare wires.  Here is the diagram

[23:43] Customer: Okay thanks, I can read more on what all that entails. Sounds simple enough.

[23:44] Customer: One more quick question, for the auto down will that just always go all the way down or is that adjustable to stop at a certain point

[23:44]        Jaime: Certainly, here are the instructions for adjusting your vertical limit switch -  File :

[23:45] Customer: perfect. that should be all i need. thanks for the help

[23:45]        Jaime: sure thing

[23:45]        Jaime: Thank you for choosing Elite Screens and have a good afternoon

[23:45] Customer: You as well