Q: Can I buy your ZRC1 kit to retrofit my existing motorized screen? Mainly for vertical position programming purpose.
A: No, the RC1 kit is not able to be retrofitted into older generation motorized screens.
RC1 Remote Kit – ZRC1-CKT-XY-F
Q: What are the ZRC1-IR Infrared Remote codes for the UP, Stop, and Down key functions?
A: The ZRC1-IR codes are as follows. UP_KEY = 0x07ED112B STOP_KEY = 0x07F519C3 DOWN_KEY = 0x07DD089B How to use the wireless 5-12 volt trigger feature Requires a 3.5mm to 3.5mm mono cable (not included). The Radio Frequency (RF) remote control serves as a dual purpose, independently as a handheld remote control, or as a Wireless…
Q: I’m experiencing electric interference with my screen and sometimes operates on its own. Is there a way to change the Radio Frequency code to prevent this from happening?
A: Yes, please follow the steps below to change the Radio Frequency code. How to change the RF code Remove the batteries Change the RF code switch Insert the batteries Synchronize it with the wall box controller
Q: Can the ZRC1-RF Radio Frequency Remote control be programmed to avoid controlling multiple screens.
A: Yes, the ZRC1-RF Radio Frequency remote can be programmed with its own unique code to control multiple screens by changing the RF code as described below. How to change the RF code Remove the batteries Change the RF code switch Insert the batteries Synchronize it with the wall box controller
Q: How do I synchronize/pair a new ZRC1-RF Radio Frequency (RF) remote?
A: Follow the directions below to synchronize/pair a new ZRC1-RF remote. Note: The wall box controller is needed for this operation. Press & hold the “Programming Key”, then press the “Up Key” on the Wall box controller (wall-box LED indicator light flashes). Then press the “Up Key” on the RF remote The Wall box LED…
Q: What is the Frequency range of the ZRC1-RF Radio Frequency remote control?
A: The exact radio frequency range of the ZRC1-RF is 433.93 MHz.
Q : What is the effective beam range and angle of the ZRC1-IR Infrared Remote Control?
A: The effective beam range 20 ft (6 M) within a 30° angle.
Q: I’m installing a new ZRC1-CKT-X circuit board and need the connection port names and locations to properly connect them to my screen.
A: Please reference the circuit board layout below. Circuit Board | ZRC1-CKT-X Connection port for 110V AC Power Connection port for electric screen tubular motor RJ50 port for connecting wall box controller Emergency stopper Infrared signal receiver Radio Frequency signal receiver Switch for selecting screen type Position 1 (Right) = Down/UP Retractable Wall/Ceiling Screen Position…