Elite provides binary codes for the IR remote, see below. Series Up Stop Down CineTension 2 Series 1111 0000 0001 1111 0000 0010 1111 0000 0100 Evanesce / Evanesce Tab-Tension B 1111 0000 0001 1111 0000 0010 1111 0000 0100 Home2 Series 1111 0000 0001 1111 0000 0010 1111 0000 0100 Spectrum Series 1111 0000…
The screen material can be cleaned with mild soap and water
No, the VMAX Tab-Tension Dual does not have a 5-12 volt trigger input.
Unfortunately, the wireless 5-12 volt projector trigger for the VMAX Dual® cannot be reprogrammed and only controls the rise/drop of the 16:9 aspect ratio screen.
The 16:9 aspect ratio screen is programmed to drop/rise when using the wireless 5-12 volt projector trigger.
The power cord on the VMAX2 series is located on the left side of the unit. This applies to all screens in the VMAX series, as well as all of the wall-mounted electric screens that we produce.
Yes, the VMAX 2 includes an RJ-45 5-12 volt trigger.
Yes, the VMAX 2 has a RJ-45 5-12 volt trigger input.
Yes. This device goes between the projector and plug. It is designed for projector w/o low voltage trigger port to work with Elite Screen motorized screen.
The screen material can be cleaned with mild soap and water.
Yes, the Spectrum has a RJ-45 5-12 volt trigger input.
This product is equipped with a Synchronous motor. It is slower than a tubular motor, but much quiet, power saving, and longer operational lifespan. In most cases, the projection screen will fully deploy at the same time the projector fully turns on to display a picture.