Fixed Frame Projection Screen Testimonials

Check All Fixed Frame Projection Screen Products

“Outstanding Screen very good quality”

Aeon CineGrey 3D® Series
Model Number: AR135DHD3

Very satisfied with my purchase very easy to install I highly recommend it u won’t regret it overall very good purchase the picture quality is amazing. 135 inch

Christian

Great screen. Love the frameless look.

Aeon Series

I love the frameless design. Assembly was quite easy and hanging with the two brackets extremely easy. With only two brackets to worry about, leveling was spot on right away.
The screen got crinkled a bit during assembly, but the micro creases have been working their way out over the past few days. I am using it without the black velvet and love the look. One downside of the design is that the screen is very tight up top, but gradually pulls away from the wall since there are no included brackets for the bottom. They really should include four brackets. I found some mirror brackets at lowes that pretty much did the trick and Elite is sending me two more of their brackets which are definitely more heavy duty.
All in all this screen is great and a bargain to boot. And I was able to go from a 103″ to a 110″ due to the frameless design.

toneygeno – Amazon.com Customer Review

“Well worth the money”

Aeon CineGrey 3D® Series
Model Number: AR135DHD3

Currently using this CineGrey 3d screen with an optoma gt1080 short throw.
Yes, short throw. I know it’s not recommended but I see absolutely no problems. No glaring, oversaturated spots, etc. The projector is only a little more than 4′ away from the screen. In the pictures I have the celling fan light (literally a few feet away from the projector) on, as well as 2 table lamps and a reading lamp. If that doesn’t speak for the ambient light rejecting (alr) properties of this screen I don’t know what does.
The colors pop more and, after recalibration, much more realistic plus much better contrast in dark scenes.

Kevin

Great Value ezFrame CineGrey 5D® Series

ezFrame CineGrey 5D® Series
Model Number: R110DHD5

“Fantastic Value. Does a good job with side ambient light. I am able to keep room lights on and still keep good picture quality. Easy to put together. Only took about 30 minutes to put screen together.”

Todd Boledovic – Amazon.com Customer Review

Great Screen, Straight Forward Installation and Performed to Expectations

ezFrame CineGrey 5D® Series
Model Number: R100DHD5

After many reviews and hours of research I finally pulled the trigger on the Cinegrey 5D screen. I watched clips of other screens and am lucky enough to be close enough to Elite and the more expensive competitor, SI, to view this screen and the Black Diamond in person. There is clearly not $1700 dollars difference to justify the more expensive SI BD screen (IMO).

Installation: I was prepared for an exercise in futility after reading some of the other reviews here with regards to putting this together. I cleared an open space, laid down two bed sheets over the hardwood and followed the instructions to put it together. Bolting the frame together was a snap. The instructions were clear and being able to lay it all out made is a snap. The felt overlay has a few little shoddy spots (Black Sharpie fixed that) and doesn’t perfectly align in one joint, but it’s nothing anyone but me will notice. A cordless power drill had this thing together in about 10 minutes.

The screen, once laid out on the frame was fairly self explanatory. The nice little red arrows on the frame showing where the snaps lock in was a nice addition. The plastic tubes go in like a tent (Make sure to have the shorter ones on the horizontal and the two long ones on the vertical) and then I placed them in the grooved frame and went around the frame pulling it tight and pushing the screen into place and locking it in place with the snaps. I took my time here and stopped a for a beer, but in all it took no more than 15 minutes to get the screen in place. I was a little worried, because once I completed it there were some waves in the bottom of the screen. Not to fear, once the brace was locked into place it pulled everything very tight. I now had a perfectly smooth ready to hang screen. Piece of cake.

Viewing Experience: This section will have an update once my Benq W1070 arrives this week. I used my conference projector as an initial test case. It’s an Epson. EX5220, super simple conference room projector and not intended for home theater. I fired it up with the HDMI output from my cable box with no lights and my initial impression was wow. I couldn’t believe the picture from this no frills business projector. This thing usually looks washed out with no color pop at all. Then I turned all the lights on in the living room. There are no less than 6 LED lights on and the picture was unfazed. Once again, I was shocked at the picture. Little to no washout at all. Then came the next day. At 2 in the afternoon it’s the brightest my living room gets. While there is no direct light, it’s still full on daytime. The picture was once again fully watchable with very little washout at all. My wife couldn’t tell the difference between the night with all the lights on and the day with the blinds open. I’ll give a full review with video once the Benq is installed.

I would recommend this screen for anyone with ambient light issues. You’re never going to get the same picture as a fully blacked out room, but IMO this is about as close as you are going to get with the lights on. Also, don’t expect miracles if you have sunlight shining directly on your screen. Heck, even LCD and Plasmas have issues displaying properly with that problem. Get it, you won’t be disappointed.

Ron Ferguson – Amazon.com Customer Review

New testimonials video for the ezFrame Series at Hooters

ezFrame Series
“The Elite Screens acoustically transparent screen measures 120 inches diagonally, and is fed by a Panasonic PT-AE3000U projector. A false wall supports the screen and behind it are the front speakers and subwoofer of the Onkyo surround-sound system.”

A must buy

Aeon CineGrey 3D® Series
Model Number: AR100DHD3

“Absolutely, positively a must buy for any home theater!!!!! The clarity of the Aeon grey elite screen is amazing.”
Jason – From an Amazon.com Customer Review

120″ CineWhite® Elite EZFrame screen

ezFrame Series
“I just recently purchased a new projector and the seller included a new in the box 120″ Cinewhite Elite EZFrame screen. I currently have a 92″ Stewart Firehawk. I set up the Elite to try it and liked the image with my new DLP projector. ”

Jeff Brohman – FL

“Great Screen, Straight Forward Installation and Performed to Expectations”

ezFrame CineGrey 5D® Series
Model Number: R100DHD5
After many reviews and hours of research I finally pulled the trigger on the CineGrey 5D® screen. I watched clips of other screens and am lucky enough to be close enough to Elite and the more expensive competitor, SI, to view this screen and the Black Diamond in person. There is clearly not $1700 dollars difference to justify the more expensive SI BD screen (IMO).

Installation: I was prepared for an exercise in futility after reading some of the other reviews here with regards to putting this together. I cleared an open space, laid down two bed sheets over the hardwood and followed the instructions to put it together. Bolting the frame together was a snap. The instructions were clear and being able to lay it all out made is a snap. The felt overlay has a few little shoddy spots (Black Sharpie fixed that) and doesn’t perfectly align in one joint, but it’s nothing anyone but me will notice. A cordless power drill had this thing together in about 10 minutes…

From an Amazon.com Customer Review ezFrame CineGrey 5D® series

DIYer Meets Modern Art Deco

Sable Frame AcousticPro1080P3 Series
Model Number: R120WH1-A1080
The Elite Screens acoustically transparent screen measures 120 inches diagonally, and is fed by a Panasonic PT-AE3000U projector. A false wall supports the screen and behind it are the front speakers and subwoofer of the Onkyo surround-sound system.

Awesome screen and worth the money!

Aeon Series
Awesome screen and worth the money! This was my first projector screen purchase as I was replacing my plasma tv. This screen is paired with the Epson 5030uBE. I was not sure whether to buy a super expensive screen ,or a really cheap one ,or middle of the road,etc. I was worried about buying this screen due to some of the reviews showing ripped edges and cheap quality, but they must have fixed that issue because my screen is great(Elite Screens Aeon, 100in, edgeless, white). It did take a good amount of time putting together as I was being careful and it was just me putting it together. The screen material is really stretchy and you may not think it will fit over the frame but I assure you it will.
The picture is amazing at night/in a dark room and is every bit as good, possibly better than my old plasma. I have no regrets buying this screen and no complaints. I would buy it again and would recommend to buy.

Jeremy K.

Aeon Series, Model Number: AR135DHD3

Aeon CineGrey 3D® Series
Model Number: AR135DHD3
This screen is excellent. Though I have a dim room and control over ambient light I went with this option because of the CineGrey 3D® material has a 1.2 gain (which boosts brightness) and is ambient light rejecting. My projector is an Epson 2045 which pumps out 2200 white/2200 color lumens (according to Epson). Because of the material’s color (grey), it helps boost black levels. If you have an LCD-based projector, which sometimes gets a bad rap as struggling with black levels, this screen can help. I was worried about that but when the picture was up on the screen the black levels looked fine.
The screen basically looks like a giant LED. One thing to consider too, is that though this is tad pricey, having a great screen can last you a long time. It is much more likely that you’ll be rotating the projector than the screen in years to come. Thus, it’s a wise investment if you are heading down the projector route.

Rob – Amazon.com Customer Review