Ambient Light Rejecting WhiteBoardScreen™ Series

  •   
  •   
  •   
  •   
  •   
  •   

How to order a WhiteBoardScreen™ Series 

Buy WhiteBoardScreen™ Series

 

The versatile Ambient Light Rejecting WhiteBoardScreen™ has enhanced reflectivity: This whiteboard projection screen uses our unique StarBright™ 4 (4.0 gain) material for in-line seating. Its highly reflective projection surface enhances brightness and contrast while countering the washout effect of ambient light. It is perfect for rooms with high ambient light, such as persentations rooms, when used with standard throw projectors.

Screen Material

  • StarBright™ 4 with 4.0 gain projection surface is coated with a transparent dry-erase layer for training presentations
  • 120° viewing angle
  • High reflectivity is ideal for presentations with high levels of ambient light
  • 4K  Ultra HD, Active 3D, and HDR Ready
  • Unique optical coating supports high uniformity and picture quality
  • Contrast enhancements improve picture black levels for greater resolution and balanced color temperature
  • Available in the following diagonal sizes:
    • 60" and 80" in 4:3 format 

 

Design and Installation

  • Cutting-edge design combines projection screen and dry erase board into one space-saving economical product
  • Includes dry-erase markers, eraser, and bracket installation kit
  • For energy conservation and extended projector lamp life, use projector on economy mode. The StarBright™ 4 material enhance image brightness.

 

Quality and Reliability

  • 2-Year / 3-Year ENR-G Manufacturer's Warranty by Elite Screens, an  ISO9001 manufacturer since 2004
  • Lifetime Tech Support by Elite's Professional Service Team through Email, Web Chat or Toll Free Phone Call
  • Setup Guide: Ambient Light Rejecting Projection Screens

  • WhiteBoardScreen™ ALR Product Video

  • WhiteBoardScreens™ Comparison

  • WhiteBoard Cleaning Instructions

  • Selecting a Screen Size Educational Video

  • ANSI Lumens and Screen Gain Educational Video

.

Dimensions Table

The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.

Decoding the Model Number
Model Number = WB60V
WB = WhiteBoardScreen Series
60 = Nominal Diagonal Size
V = 4:3 aspect ratio
(H = HDTV 16:9 / X = 16:10 / S = 1:1 / C = 2.35:1)
 

Ambient Light Rejecting WhiteBoardScreen™ Series Dimensions Table
Model NumberDiag. SizeAspect RatioView Area (HxW)Screen MaterialCase ColorGainOverall Width (A)View Width (A1)Overall Height (B)View Height (B1)Tray Length (A2)B2C1C2
Model NumberDiag. SizeAspect RatioView Area (HxW)Screen MaterialCase ColorGainOverall Width (A)View Width (A1)Overall Height (B)View Height (B1)Tray Length (A2)B2C1C2
WB60V60"4:335.0"x46.9"StarBright™ 4Black (Border)Gain 448.646.936.835.039.432.94.56.3
WB80V80"4:346.9"x62.6"StarBright™ 4Black (Border)Gain 464.462.648.646.955.144.75.79.0
Unit

hd projector screen, Home Cinema Projector Screen, Home Movie Theater Screens, home theater projection screen, Home Theater Projector Screens, home theater screen, Buy Projector Screen, whiteboardscreen series dimensions, whiteboardscreen dimensions, elite screens whiteboardscreen series, dry erase white board projection screen, dry erase white board projector screen, ambient light rejecting projector screen, ambient light rejecting projection screen, ambient light rejecting screen, alr screen, ambient light rejecting whiteboardscreen series dimensions, ambient light rejecting whiteboardscreen dimensions, elite screens ambient light rejecting whiteboardscreen series,

Ambient Light Rejecting WhiteBoardScreen™ Series Packaging Dimensions
Model NumberDiag. SizeAspect RatioN.W. (lbs.)G.W. (lbs.)N.W. (Kgs)G.W. (Kgs)Packaging Dimensions (LxHxW)
Model NumberDiag. SizeAspect RatioN.W. (lbs.)G.W. (lbs.)N.W. (Kgs)G.W. (Kgs)Packaging Dimensions (LxHxW)
WB60V60"4:334.4 lb39.7 lb15.6 kg18.0 kg52.4"x40.9"x3.2"
WB80V80"4:357.3 lb72.8 lb26.0 kg33.0 kg68.1"x52.6"x3.2"
Unit

Projector Placement for Angular-Reflective Screen

Notice to Installer:

Please use the following installation instructions to obtain superior optical performance from the ALR (Ambient Light Rejecting) Screen.

  • Angular-Reflective material is not compatible with ultra/short-throw projectors
  • Minimum lens throw ratio 1.5x image width
  • Ambient light must not come from the same direction as the projector 

 

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is important to position the projector so that the viewer will get the best possible image.

  • Step 1: Establish the general “eye level” of the viewers
  • Step 2: Set the appropriate projection level
  • Step 3: Adjust the screen height level and projection angle 

Input Angle (A) = Output Angle (B) aligns with the viewer’s angle

angular reflective screen, ambient light rejecting screen material, angular reflective ambient light rejecting screen material, alr tip

.

.

FAQ's

Q: Can I buy a small screen material sample?

A: Yes, you can buy a screen material sample by clicking on the link below.

http://shop.elitescreens.com/material-sample.aspx

Q: How do I properly remove dry-erase markings from my Elite Whiteboard Projection Screen?
A:
Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to properly maintain and clean your dry-erase surface projection screen. (These Whiteboard cleaning tips are just as relevant with any dry-erase writing surface as they are with our Whiteboard-Projection Screens.)

  1. Only use a high density foam eraser when removing dry-erase markings from the Whiteboard screen.
  2. Do not use abrasive erasers as these may scratch the surface of the screen.
  3. Never spray the whiteboard cleaner solution onto the surface while marker writing is present and then attempt to use a high density foam eraser to remove. This will only smear the dry-erase marker ink making the surface more difficult to clean and will likely ruin the foam eraser.
  4. If there are any dry-erase markings left behind even after attempting to remove them using our high density erasers, spray our whiteboard cleaning solution directly onto the screen surface and use only a soft microfiber cloth to wipe-down and clean the area.

For a video demonstration, please click here.

Q: What type of dry-erase markers do you recommend using on my Elite Screens whiteboard screen product?
A:
Elite Screens recommends using our dy-erase markers.  Additional markers can be purchased in a set, part number ZER3. Any other regular low-odor dry-erase markers brands such as EXPO are also ok to use.

Q: Is the ALR WhiteBoardScreen Series with StarBright 4 material suitable for a short-throw projector or a standard throw projector?
A:
The ALR WhiteBoardScreen Series only works with standard throw projectors due to the angular reflective surface. When placed at the angle suggested in the User Guide (angles for desktop projector mode or overhead projector mode are listed in the User Guide), the StarBright 4 provides a high 4.0 gain by rejecting ambient light at the projection surface to boost the overall picture quality. For short-throw projectors, Elite Screens WhiteBoardScreen Universal is the solution. Elite’s WhiteBoardScreen Universal Series with VersaWhite material is designed to work with both short-throw and standard throw projectors.

Q: I have an Ambient Light Rejecting screen but it does not seem to work. There are windows behind my projector and the picture is washed out; what can be done?
A: *Disclaimer:  
As great as ambient light rejecting screen technologies are, there are still certain laws of physics that define what should and should not be done with a specialty material such as this.

Main Answer:  Ambient Light Rejecting (ALR) projector screens are specially formatted to reject the majority of off-axis lighting from the top, bottom, and side angles. 
However if a strong light source is hitting the ALR material at roughly the same angle as the projector does, it will wash out the image.  
There is an easy solution.  I strongly recommend light blocking curtains or blackout shades to shield your room and to rely on the interior lighting that ALR screens work with.

Q: Why can't we use ambient light or ceiling light rejecting (ALR/CLR/CLR2) screens with ultra-short throw/short throw (UST/ST) projectors?  
A: 
Ambient light rejecting is a generic term for a variety of materials that prevents projected content from being washed out by incident room lighting from either natural or manmade sources. Each of these materials incorporate some sort of reflective microstructures that allows for projected light to create a superb image while off-axis light is either absorbed or reflected away from the viewers field of vision. 

ALR screen materials are typically made for standard “long-throw” projectors. As long as the projector and material are aligned in accordance with SMPTE standards, you will get optimal picture brightness, color-contrast, and black level dynamic range while off-axis light is essentially rejected.  We have created videos and articles on proper video and seating alignment to achieve the proverbial “sweet spot” for picture performance. Because Short-throw and UST projectors spread out their light signal over a comparatively short distance, much of the light is off-axis and will therefore be rejected by the material.  

Materials like our Starbright CLR® are specifically designed for UST projectors. Their reflective microstructures are aligned to reflect the upward spread light signal from UST projectors into a viewer’s field of vision. At the same time, the “CLR®” rejects other forms of off-axis light such as regular room lighting, window light, ceiling light or even the direct signal from a standard throw projector.  

 

Q: How about using any “ALR” (Cinegrey®3D/5D or Starbright CLR, etc.) by Elite with a ceiling-installed UST/ST projector?
A: 
Ceiling mounted UST projectors will not even work with a Starbright CLR® material because the material is specifically orientated to reject “ceiling light” or any type of lighting from above. This means that the screen will reject any overhead light, even from a compatible projector. Theoretically, you could invert the Starbright CLR® material to match with an inverted UST projector but the alignment will still not likely align properly with the human eye to deliver the ideal “sweet-spot” picture performance.


See the complete list of FAQ here

 

.

Questions and Suggestions

Name *

E-mail *

Address 1 *

Address 2

City *

Zip-Code

State

Country *

Phone *

Subject*

Please tell us what series or accessories you are browsing *

Message*

Captcha*

Can't read the image? click here to refresh.