•   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   

How to order an Insta-RP Series

 

A self-adhesive DIY rear projection screen film with a 2.2 gain reflectivity.  The Insta-RP Screen is a self-adhesive rear projection optical screen film suitable for commercial applications such as storefront windows, resorts, restaurants and nightclubs. The Insta-RP is the ideal solution for wherever a permanent rear projection display is needed.

Screen Material

  • Self-adhesive optical rear projection material
  • Textured PET (Polyethylene terephthalate) with diffusion layer
  • 2.2 gain with 180º wide diffusion uniformity
  • 4K Ultra HD, Active 3D, and HDR Ready
  • 5.1% transparency grade
  • Minimum throw (lens) ratio of 0.19 x image width
  • Material is easy to clean and maintain
  • Available in the following diagonal sizes:
    • 99" in 4:3 format
    • 98", 100" and 121" in 16:9 format
    • 98", 100" and 112" in 16:10 format
    • 151" in 2.35:1 format
    • Also available in 247" (5x20)

 

Quality and Reliability

  • 2-year Parts & Labor manufacturer's warranty
  • 3-year warranty offered through ENR-G program (Education, Non-Profit, Religious and Government)
  • Insta-RP Series Video

  • Selecting a Screen Size Educational Video

  • ANSI Lumens and Screen Gain Educational Video

.

Dimensions Table

The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.

Decoding the Model Number
Model Number = iRP112X
iRP = Insta-Rear Projection Series
112 = Nominal Diagonal Size
(5X20 = Screen Size (H ft x L ft))
X = 16:10 aspect ratio
(V = 4:3 / H = HDTV 16:9 / S = 1:1 / C = 2.35:1)
 

Insta-RP Series Dimensions Table
ModelDiag. SizeAspect RatioView Area (HxW)Screen MaterialCase ColorGainView Height (A)View Width (B)Thickness (C)
ModelDiag. SizeAspect RatioView Area (HxW)Screen MaterialCase ColorGainView Height (A)View Width (B)Thickness (C)
iRP121H121"16:959.1"x104.9"Wraith Veil 2N/AGain 2.259.1104.90.0039
iRP70X70"16:1036.9"x59.1"Wraith Veil 2N/AGain 2.236.959.10.0039
iRP112X112"16:1059.1"x94.5"Wraith Veil 2N/AGain 2.259.194.50.0039
iRP151C151"2.35:159.1"x138.8"Wraith Veil 2N/AGain 2.259.1138.80.0039
iRP5x20247"N/A59.1"x240.0"Wraith Veil 2N/AGain 2.259.1240.00.0039
Unit

hd projector screen, Home Cinema Projector Screen, Home Movie Theater Screens, home theater projection screen, Home Theater Projector Screens, home theater screen, Buy Projector Screen, insta-rp series dimensions, insta-rp dimensions, elite screens insta-rp series, rear projection screen, rear projector screen, film projection screen material, film projector screen material

Insta-RP Series Packaging Dimensions
ModelDiag. SizeAspect Ratio N.W. (lbs.) G.W. (lbs.) N. W. (Kgs) G.W. (Kgs) Packaging Dimensions (LxWxH)
ModelDiag. SizeAspect Ratio N.W. (lbs.) G.W. (lbs.) N. W. (Kgs) G.W. (Kgs) Packaging Dimensions (LxWxH)
iRP121H121"16:92.3 lb4.4 lb1.1 kg2.0 kg60.8"x5.3"x5.3"
iRP70X70"16:101.3 lb3.5 lb0.6 kg1.6 kg47.8"x5.3"x5.3"
iRP112X112"16:102.2 lb4.3 lb1.0 kg2.0 kg60.8"x5.3"x5.3"
iRP151C151"2.35:12.8 lb4.9 lb1.3 kg2.2 kg60.8"x5.3"x5.3"
iRP5x20247"N/A4.1 lb6.3 lb1.9 kg2.8 kg60.8"x5.3"x5.3"
Unit

hd projector screen, Home Cinema Projector Screen, Home Movie Theater Screens, home theater projection screen, Home Theater Projector Screens, home theater screen, Buy Projector Screen, insta-rp series dimensions, insta-rp dimensions, elite screens insta-rp series, rear projection screen, rear projector screen, film projection screen material, film projector screen material

.

.

FAQ's

Q: What is the minimum lens throw ratio of the Insta-RP/Insta-RP2?  Can I use an ultra/short-throw projector?
A:
The minimum lens throw ratio is 0.2 x image width. Yes,  all projectors with minimum 0.2 lens throw ratio are all compatible with the Insta-RP/Insta-RP2.

Q: Can I buy a small screen material sample?

A: Yes, you can buy a screen material sample by clicking here.

Q: Can the Insta-RP film material be installed on a curved glass/plexiglass and still retain its performance qualities?
A:
Yes, the Insta-RP film will indeed function perfectly on a curved glass setup. Below are two examples of such installations:

Q: What is the difference between the Insta-RP and Insta-RP2?
A:
The Insta-RP 2 utilizes a modified variation of the WraithVeil 2 screen material that is used in the Insta-RP series. Although it shares similar properties to Insta-RP such as gain, viewing angles, and installation method, there are a couple of key differences between the two. The most important distinction is that the Insta-RP 2 is intended for angled projection only as the light is dispersed more uniformly when the projected image is coming from an angle. This characteristic was designed to eliminate “hot-spotting” from occurring. The other disparity is that the Insta-RP2 material is slightly thinner in comparison to the Insta-RP.

Q: What is the transparency grade on the Insta-RP?
A:
The transparency grade of the Insta-RP is 5.1%.

Q: Is the Insta-RP fully transparent when the projector is not in use?
A:
No, the Insta-RP is not transparent, it has a frost color.

Q: Is the Insta-RP (Apparition) material reusable? Can I remove it from one location and use it in another?
A:
No, the Insta-RP is designed as a one-point application material. Its special adhesive that allows it to stick firmly in its installation converting empty window space into a rear projection screen for as long as the end user wants it to be. Although its removal is relatively easy, the adhesive in the Insta-RP material will be diminished beyond its potency for reuse.

Q: What is the recommended best and safe way to properly remove the Insta-RP backing?
A:
For best results, we recommend the following steps.

  1. Stick a piece of Scotch Magic Tape to both sides of the Insta-RP
  2. Grab each of the tap ends and slowly begin to pull them apart to allow the materials to separate from each other.

Q: Can I use the Insta-RP / Insta-RP2 as both a front and rear projection surface?
A:
While one may project images on the front of the surface of the Insta-RP/Insta-RP2…the quality of the reflected image may not perform equally, and therefore reduce the overall fidelity of the picture.

Q: What are the model numbers in the Insta-RP Series?
A:
Here is a complete list of the model numbers in the Insta-RP Series: iRP74V, iRP99V, iRP68H, iRP103X-100H, iRP121H, iRP70X, iRP112X, iRP151C, iRP5x20

Q: Can the Insta-RP/2 Screen be cut to a custom size to fit a particular set of dimensions? If it is possible, do you recommend a particular tool to get the cut right?
A:
Yes, the Insta-RP/2 can be cut to size.  It is strongly recommended to use a long ruler and a sharp blade such as an exacto/utility knife or a precision cutter tool to make a smooth precise cut. Make sure the blade is new.

.

Questions and Suggestions

Name *

E-mail *

Address 1 *

Address 2

City *

Zip-Code

State

Country *

Phone *

Subject*

Please tell us what series or accessories you are browsing *

Message*

Captcha*

Can't read the image? click here to refresh.